[stextbox id=”black”]TMCF01S-TMCF07S – Magnet drive rotary vane pump motor units
Driver for TM Series pumps[/stextbox]

[stextbox id=”grey”]01-MG200-400

Fluid-o-Tech® has combined its expertise in rotary vane pumps and magnet drives to exclusively manufacture this series of pumps. The principle of the magnet drive is the driving force of the pole-to-pole alignment of two magnets. The driven magnet is fixed to the pump shaft, while the driving magnet is fixed to the motor shaft and closely located to the driven magnet. By means of magnet attraction, the pump rotates in response to motor shaft rotation. Available in 6 different displacements, with either a brass or stainless steel housing, AISI 303 rotor, carbon graphite pumping chamber and 3/8” GAS or NPT threaded ports, this pump line may be equipped, upon request, with standard or balanced built-in relief valve and NBR, EPDM or Viton® seals.

Compared to conventional coupling, the magnet drive has several advantages:
1) Longer service life
2) No leaks or contamination
3) Noiseless operation
4) No contact between pump and motor shaft
5) Higher efficency

[/stextbox][stextbox id=”warning”]NOTE:
Max system pressure: 18 bar (260 psi), Max temperature: 70 °C (158 F)
Espresso coffee machines, Soda circulation, Reverse osmosis, Solar heating systems, Cooling systems, Refrigerating gas transfer[/stextbox]